PRODUCTS
Horizontal packer
Overall size: l2200 * w800 * h3114mm
Pantograph specification: l1680 * w2200mm (external)
L1400 * w2000mm (internal)
Weight: 1550kg
Power supply: three phase / 380V / 50Hz
Bonding method: hot fusion
Binding tightness: motor tension, tension 0-350kg adjustable
Air pressure: 4-6kg/
Binding method: 1 × 1/2 × 2/3 × three
Product characteristics
1. Binding force: 350kg
2. Linear speed of machine table: 2-30m / min
3. Binding speed: ≤ 15s / pass
Welding method, welding position: ≥ 4.2mm, welding position deviation: ≥ 0.2mm
5. Tensile resistance of welded joint ≥ 90% plastic steel belt strength
6. Applicable material: plastic steel (PET) packing belt 1206
7. The applicable specification of plastic steel belt is: width (9-15mm) + (0.55-0.8mm). It can be customized according to special requirements
8. Diameter of paper core of plastic steel belt: 403-406mm
9. Height of plastic steel belt ring: 15pmm
10. Diameter of outer ring of plastic steel belt: 406-550mm
11. The self-developed plastic steel belt movement can adjust the tension by 0-350kg
12. PLC: Siemens
13. Other electrical components are imported parts or joint venture parts
14. It is equipped with manual, linkage, photoelectric induction and other operation modes, which can be freely selected and switched at will
15. There is an automatic pass through file, so that the product can pass directly without packaging
16. There are three photoelectric sensors, and the photoelectric sensing distance and mutual spacing can be adjusted
17. Equipped with emergency switch, it can brake immediately in case of emergency
18. Refueling free maintenance, clean and convenient
19. Noise: in the working environment, the noise shall not be greater than 75db
20. Environmental conditions: temperature 98% RH, temperature - 20 ~ 50 ℃
21. Installation conditions: the maximum load of the floor is 2050kg / m2, and the minimum space is H3 6mxw2. 2m
Next:packing belt